I have an X-spot that refuses to strike. I tried swapping the lamps, the lamp powersupply and the ignitor along with the relay. I swapped all of the parts between two x-spots and the other one fired up just fine with the first ones parts and the first one still wouldnt fire up. I checked the lamp safety switch, it was all good, i also ran a continuity test of the wire loom that goes to the safety switch, and a contiunity test of the wires from the ignitor to the lamp ceramic. ANY IDEAS :aargh4::aargh4::aargh4:
If my memory is correct, Puffy and I ran in to one that was having the same issues as yours, and we ran it down to the lamp wire assembly. Never found the reason why, but I was thinking the wire was broken somewhere from the ing card! But thats my .02 cents.
If my memory is correct, Puffy and I ran in to one that was having the same issues as yours, and we ran it down to the lamp wire assembly. Never found the reason why, but I was thinking the wire was broken somewhere from the ing card! But thats my .02 cents.
