Studio Color 575 question

I am having issues with the magenta wheel on my SC 575. I figure its probably the motor going. It's almost 5 years old. But in the past on other fixtures I replaced the driver chip at the same time just to be on the safe side. But I am unable to locate the part number for this chip for this fixture. Any ideas? And is there anything else in your guys collective knowledge that might cause a color wheel to not home properly or fall into place ?:dunno:

Thanks
Parents
  • 0
    [quote=Woodj32177]Just a note puffy,
    Perhaps you haven't run into these logic cards,
    Some of the Studio Spot's came with 3775 Driver Chips,
    and since these boards work just fine in studio color, sometimes they find their way there..
    I have replaced a driver chip on more than one occaision to find that it was a 3775, and had to order one to replace it, now I stock both types..

    As for the repair, I would just replace the motor,
    99% of the time that is the problem (unless the belt looks like it is bad)

    Joshua Wood

    Ya caught me!:dunce: :dunce: You are correct sir. It's the 5 not the 1.
Reply
  • 0
    [quote=Woodj32177]Just a note puffy,
    Perhaps you haven't run into these logic cards,
    Some of the Studio Spot's came with 3775 Driver Chips,
    and since these boards work just fine in studio color, sometimes they find their way there..
    I have replaced a driver chip on more than one occaision to find that it was a 3775, and had to order one to replace it, now I stock both types..

    As for the repair, I would just replace the motor,
    99% of the time that is the problem (unless the belt looks like it is bad)

    Joshua Wood

    Ya caught me!:dunce: :dunce: You are correct sir. It's the 5 not the 1.
Children
No Data
Related

www.etcconnect.com