Cyber 5/32 Super Long Allen Wrench

After about a week or so of looking around, I can't seem to find anywhere to buy a hex/allen wrench long enough to get into the base of the light to get anything out. Anyone have a suggestion on where to find a 12-15" hex ext to get in there? I really don't want to have to take the sled out for some of these simple repairs.

Also, while I'm digging, am I going to need any other sizes in super long as well (so far I've found a need for 9/64, 1/16, 5/64, 7/64, but all in normal 7" or typical key sizes)

Thanks!
Parents
  • 0
    I do a lot of install work with a university as well as work in their theatre, and i happen to find my allen wrench to be the same one that i used for flat screen lcd mounts, i don't know if you could check with one of those company's for one (chief mounting is a big one i think) but it really made a HUGE!!!! :notworthy: difference when i was working on my cybers. was kind of luck that i had it... but i always knew it was there ;) what exactly do you have to do? I found only a need for the super long one to unscrew my wheels and mounts from the back. regular sizes worked for me pretty much after that (simple home depot run :poke: )

    _matt
Reply
  • 0
    I do a lot of install work with a university as well as work in their theatre, and i happen to find my allen wrench to be the same one that i used for flat screen lcd mounts, i don't know if you could check with one of those company's for one (chief mounting is a big one i think) but it really made a HUGE!!!! :notworthy: difference when i was working on my cybers. was kind of luck that i had it... but i always knew it was there ;) what exactly do you have to do? I found only a need for the super long one to unscrew my wheels and mounts from the back. regular sizes worked for me pretty much after that (simple home depot run :poke: )

    _matt
Children
No Data
Related

www.etcconnect.com