Trackspot Part and Problem

ok I have one Trackspot needs a new TS31F V4.1 chip as the one it was damaged when it was taken out then put back in backwards then powered up. The light worked fine before this happened, someone used the chip to try and troubleshoot another Trackspot, how can I get the replacement chip?

The second issue is I have a Trackspot that when it is powered up it seems like it has sezuires, i also makes a loud beeping kind of sound from the tilt motor. When the dip switch is swithed on to put it into self test mode there is no response, any ideas on what could be bad on the light? It looks like someone had taken or pryed the v 4.2 chip off before so I'm thinking that it is bad.
Parents
  • I switched the cables when it was off and upon plugging the unit back in, it didn't boot up. (I was thinking it was a bad tilt motor). switching the cables back didn't fix the problem. Upon replacing the pan and tilt driver chips and the EEPROM, its fine. It may have been just the EEPROM, but i didn't check the removed driver chips. I thought it was ok to switch the wires coming from any motor, but this made me think differently. Am i correct or not?
Reply
  • I switched the cables when it was off and upon plugging the unit back in, it didn't boot up. (I was thinking it was a bad tilt motor). switching the cables back didn't fix the problem. Upon replacing the pan and tilt driver chips and the EEPROM, its fine. It may have been just the EEPROM, but i didn't check the removed driver chips. I thought it was ok to switch the wires coming from any motor, but this made me think differently. Am i correct or not?
Children
No Data
Related