I have two cyberlight fixtures, which refuse to dim fully. they remain open even though the fader is fully closed, I have tried different boards, different power, and different cabling but they still refuse to close.
Are they interfering with each other? Or are they just not homing correctly? Do they move easily by hand when there is no power? I would do a hub setup for starters, and if that doesn't solve it, I would replace the offending motor.
If you do end up replacing the motor, you still will need to do a hup setup after it is replaced. otherwise you may still have dimming problems. Good Luck! Joshua Wood
Are they interfering with each other? Or are they just not homing correctly? Do they move easily by hand when there is no power? I would do a hub setup for starters, and if that doesn't solve it, I would replace the offending motor.
If you do end up replacing the motor, you still will need to do a hup setup after it is replaced. otherwise you may still have dimming problems. Good Luck! Joshua Wood
