• State Not Answered
  • Date
    williesk8
  • Date
  • Replies 3 replies
  • Subscribers 13 subscribers
  • Views 417 views
  • Users 0 members are here

CMY Colour Mode

Hi there,
I having some trouble with the CMY Colour Mode.
I have a few Showpix in Standard Mode. The Intensity is @Full.
But when I am turning the Encoder Wheel in CMY Mode or want to output some content nothing happens. In RGB and all other Modes the fixtures do what I expected. But in CMY Mode there is no output at all.

Can somebody help me out on this problem?

Oliver
Parents
  • 0
    Hi Oliver,

    What console are you running these fixtures with? This will help me offer proper programming syntax assuming its on a HOG :hogsign:

    How do you have the SHOWPIX patched?

    Assuming you are using a Hog, are you selecting a media folder and media file to output in one of your image layers? Once the Intensity of the 'SHOWPIX Standard' is at FULL, then select a 'SHOWPIX Image' layer and try MEDIA FOLDER 'lens' and then select MEDIA FILE 1 which should be open white (all LEDs are ON and white) then try and manipulate your CMY values.
    OR
    Make sure that your Color Function parameter is set to correct color function, see below.
    CMY
    Color Function parameter DMX value = 1
    This option simulates CMY color by inverting RGB color components and is the default value for the color function parameter. Use this parameter when you want to color mix with a CMY color model instead of RGB.
    Red Parameter:
    Increases cyan color component from 0 = no adjustment to 65,535 (100%) = maximum cyan saturation.
    Green Parameter:
    Increases magenta color component from 0 = no adjustment to 65,535 (100%) = maximum magenta saturation.
    Blue Parameter:
    Increases yellow color component from 0 = no adjustment to 65,535 (100%) = maximum yellow saturation.

    Hope this helps gets you going.
    Best Regards,
    paul
Reply
  • 0
    Hi Oliver,

    What console are you running these fixtures with? This will help me offer proper programming syntax assuming its on a HOG :hogsign:

    How do you have the SHOWPIX patched?

    Assuming you are using a Hog, are you selecting a media folder and media file to output in one of your image layers? Once the Intensity of the 'SHOWPIX Standard' is at FULL, then select a 'SHOWPIX Image' layer and try MEDIA FOLDER 'lens' and then select MEDIA FILE 1 which should be open white (all LEDs are ON and white) then try and manipulate your CMY values.
    OR
    Make sure that your Color Function parameter is set to correct color function, see below.
    CMY
    Color Function parameter DMX value = 1
    This option simulates CMY color by inverting RGB color components and is the default value for the color function parameter. Use this parameter when you want to color mix with a CMY color model instead of RGB.
    Red Parameter:
    Increases cyan color component from 0 = no adjustment to 65,535 (100%) = maximum cyan saturation.
    Green Parameter:
    Increases magenta color component from 0 = no adjustment to 65,535 (100%) = maximum magenta saturation.
    Blue Parameter:
    Increases yellow color component from 0 = no adjustment to 65,535 (100%) = maximum yellow saturation.

    Hope this helps gets you going.
    Best Regards,
    paul
Children
No Data
Related

www.etcconnect.com