I have a studio spot that the pan feels weak. Such as when it is on its side it will not home correctly, there is very little resistance to move it. The tilt started to act the same way. I tried swapping power supplies thinking it could be weak since it is both pan and tilt. Same results. I tried swapping logic boards (the logic board was marked as good but who knows). Now its just the pan doing it again. Any ideas?
according to the meter all is well with the wiring. I tried swapping the pan and tilt plugs on the board, besides the fixture absolutely hating me, it felt like the pan was still weak and the tilt was fine. They didnt even try moving though, they just threw an error of pan fail/tilt fail.
according to the meter all is well with the wiring. I tried swapping the pan and tilt plugs on the board, besides the fixture absolutely hating me, it felt like the pan was still weak and the tilt was fine. They didnt even try moving though, they just threw an error of pan fail/tilt fail.
