Intellabeam DMX channels

Hi,

I just got a couple of Intellabeam 400.
On my Grand MA's profile there are 8 channels, the last one is for the speed. But this speed channel has no effect on the mirror or gobo/color change speed.
On the online manual there is nothing mentionned about the DMX channels.

After searching on Google, some say that there are 8 channels some other 13 channels.

Could somebody tell me what is right. 7, 8 or 13?

Parents

0 woodj32177 - Former HES Forum Member over 15 years ago

To get the full usage out of them, you want them in 13 channel mode.

To set them to 13 channel mode,
Dip switch 3 should be on for channels 1-256, or off for 257-512
Switch 4 should be off for channels 1-256 or on for 257-512
5 should be off
6 should be on
and 8 should be on

Then just use the normal dmx dipswitch setup for addressing.
hopefully this makes sense,
Let me know if anything needs clarification.
Joshua Wood
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 woodj32177 - Former HES Forum Member over 15 years ago

To get the full usage out of them, you want them in 13 channel mode.

To set them to 13 channel mode,
Dip switch 3 should be on for channels 1-256, or off for 257-512
Switch 4 should be off for channels 1-256 or on for 257-512
5 should be off
6 should be on
and 8 should be on

Then just use the normal dmx dipswitch setup for addressing.
hopefully this makes sense,
Let me know if anything needs clarification.
Joshua Wood
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data