X-Spot error codes

First of all I love the display on the X-Spot. Lots of useful information.

The unit I am working on now has several errors.

It has one edge not found error, four tab not found errors, and one closed not found error.

What is the difference between an edge, a tab, and a closed not found error?

I could not find it in the manual.

Also, does this seem indicative of problems with the wheels/sensors or more of a logic board issue?

Thanks

Mike
Parents
  • 0
    1. All wheels attempt to home
    2. The two phase cards start out blinking red and end up a combination of orange/green LEDs

    The two phase card on the side with the larger square card lights up green/green/orange/orange on the top card and the one below it is all orange. The other side is green/orange/green/green on the top card and green/green/green/orange on the bottom one.

    3. One of the rotating gobo wheels (the one with the bar litho in it which is on the bottom) seems to be getting caught on something. Perhaps the card that stops the color wheels.

    It also looks like the wheels are really close to one another.

    Mike
Reply
  • 0
    1. All wheels attempt to home
    2. The two phase cards start out blinking red and end up a combination of orange/green LEDs

    The two phase card on the side with the larger square card lights up green/green/orange/orange on the top card and the one below it is all orange. The other side is green/orange/green/green on the top card and green/green/green/orange on the bottom one.

    3. One of the rotating gobo wheels (the one with the bar litho in it which is on the bottom) seems to be getting caught on something. Perhaps the card that stops the color wheels.

    It also looks like the wheels are really close to one another.

    Mike
Children
No Data
Related

www.etcconnect.com