X-Spot error codes

First of all I love the display on the X-Spot. Lots of useful information.

The unit I am working on now has several errors.

It has one edge not found error, four tab not found errors, and one closed not found error.

What is the difference between an edge, a tab, and a closed not found error?

I could not find it in the manual.

Also, does this seem indicative of problems with the wheels/sensors or more of a logic board issue?

Thanks

Mike
Parents
  • 0
    I can't come up with a good reason as to why unplugging either of these cards would affect the focus error.


    I had a card on a module once that was at god knows what address, and which was apparently replying on top of some other cards, and gave all kinds of fun like this . . . .

    I am still curious, and I don't recall seeing my question answered, if the fixture comes up displaying "XSpot Standard" or something else, which would be indicative of it's not correctly recognizing one of it's modules.

    - Tim
Reply
  • 0
    I can't come up with a good reason as to why unplugging either of these cards would affect the focus error.


    I had a card on a module once that was at god knows what address, and which was apparently replying on top of some other cards, and gave all kinds of fun like this . . . .

    I am still curious, and I don't recall seeing my question answered, if the fixture comes up displaying "XSpot Standard" or something else, which would be indicative of it's not correctly recognizing one of it's modules.

    - Tim
Children
No Data
Related

www.etcconnect.com