X-Spot error codes

First of all I love the display on the X-Spot. Lots of useful information.

The unit I am working on now has several errors.

It has one edge not found error, four tab not found errors, and one closed not found error.

What is the difference between an edge, a tab, and a closed not found error?

I could not find it in the manual.

Also, does this seem indicative of problems with the wheels/sensors or more of a logic board issue?

Thanks

Mike
Parents
  • 0
    Right, that is possible,
    Although the only time I have seen that happen is when my interlock switch came free, and was shorting against the frame intermittently.
    That was the hardest thing to find.
    every motor in the fixture had almost no strength.
    I agree, I would see if the motors feel bad, or pull the module and see if you can find what the module is sticking on.
    Off the top of my head, I believe the motor power supply on Xspot runs at 40 volts AC, in case you want to meter it.
    Let us know what you find out.
    Joshua Wood
Reply
  • 0
    Right, that is possible,
    Although the only time I have seen that happen is when my interlock switch came free, and was shorting against the frame intermittently.
    That was the hardest thing to find.
    every motor in the fixture had almost no strength.
    I agree, I would see if the motors feel bad, or pull the module and see if you can find what the module is sticking on.
    Off the top of my head, I believe the motor power supply on Xspot runs at 40 volts AC, in case you want to meter it.
    Let us know what you find out.
    Joshua Wood
Children
No Data
Related

www.etcconnect.com