I have 2 Studio color 575s, the CMY seems to make noise as in needing Lubrication during color cycles? Can I use something like an silicon grease to lubricate?, or should there be any lubrication at all?
Can't help you much there. Mine have been noisy from the get-go, and HES had recommended dry graphite. I pulled them all out, and cleaned them all extensively to remove any gunk or residue, and treated with dry graphite. They run as smooth as silk, and dead silent by hand, but the vibration of the stepping of the motors rattles the blades like crazy, and they are still noisy . . .
If someone else has ideas on this one, I'd love to hear them . . .
Can't help you much there. Mine have been noisy from the get-go, and HES had recommended dry graphite. I pulled them all out, and cleaned them all extensively to remove any gunk or residue, and treated with dry graphite. They run as smooth as silk, and dead silent by hand, but the vibration of the stepping of the motors rattles the blades like crazy, and they are still noisy . . .
If someone else has ideas on this one, I'd love to hear them . . .
