Studio Command 1200 ERROR?!

Hello Colleagues!

Whether there was at somebody such error "LITE TOUR ERR" on the fixture and how with it to struggle?

The device works, and to a lamp does not strike!

With the best regards
Roman
Parents
  • I'm guessing you are seeing the LAMP TOUT ERR.

    This happens when the fixture tries to strike the lamp, but cannot.

    First thing to try is to leave it off for about 5 minutes, disconnect DMX, and then try to strike it manually from the menu.

    If this doesn't work, try a new lamp.

    If it still doesn't work, then it it probably a bad ignitor.


    HOWEVER, if you are seeing the LAMP OUT ERR, then you lamp has reached the end of it's usable life and needs to be replaced. You must also re-set the lamp life counter via the menu.

    Hope this helps. :)
Reply
  • I'm guessing you are seeing the LAMP TOUT ERR.

    This happens when the fixture tries to strike the lamp, but cannot.

    First thing to try is to leave it off for about 5 minutes, disconnect DMX, and then try to strike it manually from the menu.

    If this doesn't work, try a new lamp.

    If it still doesn't work, then it it probably a bad ignitor.


    HOWEVER, if you are seeing the LAMP OUT ERR, then you lamp has reached the end of it's usable life and needs to be replaced. You must also re-set the lamp life counter via the menu.

    Hope this helps. :)
Children
No Data
Related