I seen many post here that talk about the harness on the cyberlights that links the power supply board to the logic board. My question is it wires that degrade or the end connectors? and dose anyone have a easy fix, as quick and NOT having to take apart half the light? I have two that start out ok and then sometimes (about half the time) they stop working and the bulbs go out, the only way to get them working again is to power them off and on a few times.
Generally speaking this is a part I would simply replace if it has gone bad. Since you need to pull it all the way out to inspect it anyway it is also probably easier to just swap for a known good one.
Generally speaking this is a part I would simply replace if it has gone bad. Since you need to pull it all the way out to inspect it anyway it is also probably easier to just swap for a known good one.
