I seen many post here that talk about the harness on the cyberlights that links the power supply board to the logic board. My question is it wires that degrade or the end connectors? and dose anyone have a easy fix, as quick and NOT having to take apart half the light? I have two that start out ok and then sometimes (about half the time) they stop working and the bulbs go out, the only way to get them working again is to power them off and on a few times.
I would, but right now I have one spare and two lights. I was thinking of refub'n one of the bad ones and was not sure of what gose bad the wires, end conector/crimps ect.
I would, but right now I have one spare and two lights. I was thinking of refub'n one of the bad ones and was not sure of what gose bad the wires, end conector/crimps ect.
