One of my studio color 575 has a problem with the logic board. The board seems to have no power, the display and motors are dead, but the LEDs for DMX and Lamp status are working. I replaced the whole power supply but the problem is the same. Should I replace the whole logic board? I can not believe its damaged, because the LEDs are still working..
I replaced the whole logic board. Now its all ok. That implies that the defective component is on the logicboard. As it is a very expensive unit I want to ask if anyone has an idea what component on the board could be the faulty one.
LEDs are working fine but the display is dead and the motors are without power.
I replaced the whole logic board. Now its all ok. That implies that the defective component is on the logicboard. As it is a very expensive unit I want to ask if anyone has an idea what component on the board could be the faulty one.
LEDs are working fine but the display is dead and the motors are without power.
