One of my studio color 575 has a problem with the logic board. The board seems to have no power, the display and motors are dead, but the LEDs for DMX and Lamp status are working. I replaced the whole power supply but the problem is the same. Should I replace the whole logic board? I can not believe its damaged, because the LEDs are still working..
It seemed to be that one of those logic gates doesn switch through. I had a look an the shematics and my first guess was on U13 because it is the first logic gate in the circuit. Anyway. I´ve sent the logic board to our local support here in Germany. I ve done much of repair on the StudioColors by myself, but the logic board is a bit to high for me.. ^^
It seemed to be that one of those logic gates doesn switch through. I had a look an the shematics and my first guess was on U13 because it is the first logic gate in the circuit. Anyway. I´ve sent the logic board to our local support here in Germany. I ve done much of repair on the StudioColors by myself, but the logic board is a bit to high for me.. ^^
