• State Not Answered
  • Date
    lightingguy1
  • Date
  • Replies 9 replies
  • Subscribers 13 subscribers
  • Views 1179 views
  • Users 0 members are here

Genral mantence for technobeams

Hi Guys,

I was wandering what is the best way to clean my newly aquired technos? They seam really grimy and dirty, but they were used in a rental situation, so that is their excuse....Please keep in mind that i'm mainly an LD, and not an ML Tech....


Help!
Thanks!
Parents
  • 0
    Hi there?

    So the XLR pins were supposed to stay in place? :/ I ripped the male one out with ease....not so much the female, so I had to break off the PCB..turns out it was made in 1996... :( old light has been cleaned since and works like a charm....

    Called Strong the tech support guy wasn't helpful at all :(

    Do you have a part number for the circuit board and the actual connectors?

    Thanks!
Reply
  • 0
    Hi there?

    So the XLR pins were supposed to stay in place? :/ I ripped the male one out with ease....not so much the female, so I had to break off the PCB..turns out it was made in 1996... :( old light has been cleaned since and works like a charm....

    Called Strong the tech support guy wasn't helpful at all :(

    Do you have a part number for the circuit board and the actual connectors?

    Thanks!
Children
No Data
Related

www.etcconnect.com