cyberlight sv problems

Hey, im currently running 10 sv units in my rig, but im having a bit of an issue with 3 of them.

Cyber 1: lamp flickers when turned on but turns back off after a few seconds. and rehomes itself. weird thing is, is that it still follows its right lighting cues from my hog. any suggestions???

Cyber 2: works just fine but occasionally one of the wires connectected to the lamp burns off dont know if it could be an ignitor issue, i ask this because if it is then im going to have to take the unit down. all ten of my units are placed 40 to 50 feet off the ground.

**this issue is also happening to Cyber 4.
Parents
  • 0
    Well. Got it working again. Transformer was fine had to just replace the psb. Fuses in the old psb were fine, I'm guessing the psb just went bad.been used for several years without problems.

    Many many thanks. Ill probably just feed the old psb to my tigers..and BTW!! Got cyber 2 and 4 up and running.thanks guys! I use these cybers everyday.for 8 ours straight.6 days a week. They're prone to have problems once in a while.but thanks to you guys! U make my job a little mire easier
Reply
  • 0
    Well. Got it working again. Transformer was fine had to just replace the psb. Fuses in the old psb were fine, I'm guessing the psb just went bad.been used for several years without problems.

    Many many thanks. Ill probably just feed the old psb to my tigers..and BTW!! Got cyber 2 and 4 up and running.thanks guys! I use these cybers everyday.for 8 ours straight.6 days a week. They're prone to have problems once in a while.but thanks to you guys! U make my job a little mire easier
Children
No Data
Related

www.etcconnect.com