• State Not Answered
  • Date
    aruvin - Former HES Forum Member
  • Date
  • Replies 9 replies
  • Subscribers 5 subscribers
  • Views 2006 views
  • Users 0 members are here
Options
Related

GrandMA with DMLw/Axon..

Hi All,

trying to get the GrandMA to communitcate with DML..but cant get it to work. Had anyone tried before?

DML is set to DHCP, gt IP from a DHCP router. Had set the IP on Router to 2.0.0.1, cant set the subnet, it remains at 255.255.255.0.

Thx
Parents
  • 0
    My understanding is that the MA only outputs Art-net thru a specific IP Address range? With both the DML and Axon receiving an IP Address from a router is should be working. Unless like you thought, there might be an issue with the IP subnet mask.

    I have set this up and worked with these fixtures in a similar set-up using a FULL BOAR, and did not have any issues. But then again, the FULL BOAR will take any IP Address range from a router, output Art-net. Did you say you attempted this with a Roadhog and it worked?
Reply
  • 0
    My understanding is that the MA only outputs Art-net thru a specific IP Address range? With both the DML and Axon receiving an IP Address from a router is should be working. Unless like you thought, there might be an issue with the IP subnet mask.

    I have set this up and worked with these fixtures in a similar set-up using a FULL BOAR, and did not have any issues. But then again, the FULL BOAR will take any IP Address range from a router, output Art-net. Did you say you attempted this with a Roadhog and it worked?
Children
No Data

www.etcconnect.com