My DL1 is 1.5.0 version. Now it have error message about "Pan encoder timeout" and "Tilt encoder timeout. Therefore what can I solve this problem. Thanks your help.
After changing the filter, I believe you have to let the unit sit until completely cold. At least an hour, then start it up and perform the filter calibration.
When the unit is warm, the projector fans run higher which can screw up the filter calibration.
In DL.2, we've removed the calibration system and selected an average calibration value so as to simplify filter replacement.
After changing the filter, I believe you have to let the unit sit until completely cold. At least an hour, then start it up and perform the filter calibration.
When the unit is warm, the projector fans run higher which can screw up the filter calibration.
In DL.2, we've removed the calibration system and selected an average calibration value so as to simplify filter replacement.
