Problem DL2

Dear Sir,

I have a DL2 that can't function now. It seem only the motion parts of the fixture. I checked the server still can work. The motion of the fixture can't home when the fixture turned on. And those pan/ tilt motor seems no power.

I check the base board and head board. Base board LD1 & 2 have light up but no LD3. The Head Board LD1 & 2 didn't light up. I checked that there are power supply to the head board. I tried to replaced those two Board from other DL2 but the problem still consist.

The other problem is that there are USB INITI Error. Although I changed the USB wire to the Base Board and also the server, the problem still exist.

Please help me out of it.
Thanks.

Regards,
FKM
Parents
  • to see ifhte server works properly try plugging a vga monitor directly from the back of the server and see if you get playback to the vga monitor. the possible USB error, sounds if a cable is pinched. slide out the server and check cable path that it is not binding within base.

    just some ideas, to try.
Reply
  • to see ifhte server works properly try plugging a vga monitor directly from the back of the server and see if you get playback to the vga monitor. the possible USB error, sounds if a cable is pinched. slide out the server and check cable path that it is not binding within base.

    just some ideas, to try.
Children
No Data