I am trying to use a PAL camera (Sony FCB EX480CP) to sent video into the graphics engine on the DL2. I have connected it up and get a picture (poor quality) in NTSC M mode but do not get an image from any of the PAL modes. I have set this in the menu on the DL2. It does not work even if I reset the graphics engine from the menu. I have also bypassed the switching relays and sent the S-Video directly into the connector on the computer, but this still only gives me sort of an image in NTSC M, and sent some S-Video from a Handycam which is the same.
Is there something else I need to do?
I am using Software version 1.2.3.906
Firmware 1.2.3.94
xpe 1.0.1
I am hoping to replace the NTSC camera in the DL2 with the PAL version of the same camera as video rental companies in the UK use PAL. Maybe the PAL camera could be an option on new DL2's?
