Are there any know issues/bugs regarding upgrade package 1.3.1.1208 and switching the S-Video input. We have used the feature numerous times before upgrading the fixtures and we now cannot seem to get the units to switch to S-Video input. Also are there may document changes to the manual that would require a re-print of the entire publication.
1. Set the one of the layers to play the Svideo input. See what is getting displayed. If there is a flashing white bar, then there is no signal input which means that the relays are switched to use the external input. If you are getting video feedback from the internal camera, then the relays are switched to the internal position.
2. Also make sure in the menu that the Input is set to NTSC_M. You might toggle to some other value hit Enter and then set it back to NTSC_M to be sure.
1. Set the one of the layers to play the Svideo input. See what is getting displayed. If there is a flashing white bar, then there is no signal input which means that the relays are switched to use the external input. If you are getting video feedback from the internal camera, then the relays are switched to the internal position.
2. Also make sure in the menu that the Input is set to NTSC_M. You might toggle to some other value hit Enter and then set it back to NTSC_M to be sure.
