Are there any know issues/bugs regarding upgrade package 1.3.1.1208 and switching the S-Video input. We have used the feature numerous times before upgrading the fixtures and we now cannot seem to get the units to switch to S-Video input. Also are there may document changes to the manual that would require a re-print of the entire publication.
If you unplug the DVD player are you seeing a white flashing bar across the top of the image? If not, then you most likely don't have the Object/File/Folder selected.
1. Get output from the DL.2 using onboard content. This insures that you have all the other parameters properly set.
2. Then set both File and Folder to 255. This should then pull in the S-video feed. At that point you should see either the Internal Camera or a flashing white bar.
3. If you are getting the Internal camera then you would need to set the Control channel to the proper range to switch the relay and then close the Iris/Dimmer for several seconds for it to actually switch the relay.
You might want to contact our Support Dept as they can probably work with you over the phone much quicker than doing it through the forums here.
If you unplug the DVD player are you seeing a white flashing bar across the top of the image? If not, then you most likely don't have the Object/File/Folder selected.
1. Get output from the DL.2 using onboard content. This insures that you have all the other parameters properly set.
2. Then set both File and Folder to 255. This should then pull in the S-video feed. At that point you should see either the Internal Camera or a flashing white bar.
3. If you are getting the Internal camera then you would need to set the Control channel to the proper range to switch the relay and then close the Iris/Dimmer for several seconds for it to actually switch the relay.
You might want to contact our Support Dept as they can probably work with you over the phone much quicker than doing it through the forums here.
