I've got 2 DL2s in a 1X2 collage. I uploaded a custom graphic that is just some bold text...white on black. Then I put the graphic in a Shake n Bake effect. After a while I'm seeing the fixtures get out of sync, causing the text to split from the collage mode. I've messed with the sync to and sync type, but this isn't a video clip, it's a jpeg. The only movement is from the Shake n Bake effect. I ended up resetting the fixtures, and now they are synced again. I guess I don't fully understand the sync options. "Sync to" is to assign a graphic layer a device ID to sync up with? Is this the ID I gave it using the CMA? "Sync type" is what? For this, do I put "sync type" to the graphic layer I'm using? I think I tried all this, but got no results.
Hey Scott, I have dealt with this problem before. From what I can tell and from what other people have told me, the sync doesn't affect the effects and so they will eventually go out of sync. I think the last time sync of effects was brought up was to talk about strobing. Of course Tom Ericson's recommendation was to use the FX generator on the Hog.
Hey Scott, I have dealt with this problem before. From what I can tell and from what other people have told me, the sync doesn't affect the effects and so they will eventually go out of sync. I think the last time sync of effects was brought up was to talk about strobing. Of course Tom Ericson's recommendation was to use the FX generator on the Hog.
