When you use "collage" there are two FX choices you can use. One is DMX value 134 which is the older standard one or you can use DMX value 141 which is enhanced and gives a better "sampling" resolution when breaking up a piece of content for use in collage.
So when you select your GLOBAL fixture and press the "effects 2" slot from the bottom of the right hand screen, you then get a whole bunch of options (84 to be exact) as to which FX you want to apply.
By selecting the option from the bottom row three "slots" to the right of "Contol Mode" that says "enhanced.." will put you into the enhanced collage mode. This will also be reflected on your Effect 2 Mode encoder, and will give you the full "enhanced collage" title.
The older "Collage" option will appear at the bottom left corner of these 84 FX options.
Next adjust your modifier channels (Effects 2- Mods 1>3) to set up your grid...for a 5x2 collage you will need to set ALL FX2-Mod 3 to be 255 to see what collage grid you are setting. Then set ALL FX2-Mod 1 to be 10 for a "52" grid. Then select your GLOBAL fixtures individually and set the FX2- Mod 2 to be 0 for the upper left corner, 1 for the next one right, and 2>9 for the others....more info on this in the manual.
When you use "collage" there are two FX choices you can use. One is DMX value 134 which is the older standard one or you can use DMX value 141 which is enhanced and gives a better "sampling" resolution when breaking up a piece of content for use in collage.
So when you select your GLOBAL fixture and press the "effects 2" slot from the bottom of the right hand screen, you then get a whole bunch of options (84 to be exact) as to which FX you want to apply.
By selecting the option from the bottom row three "slots" to the right of "Contol Mode" that says "enhanced.." will put you into the enhanced collage mode. This will also be reflected on your Effect 2 Mode encoder, and will give you the full "enhanced collage" title.
The older "Collage" option will appear at the bottom left corner of these 84 FX options.
Next adjust your modifier channels (Effects 2- Mods 1>3) to set up your grid...for a 5x2 collage you will need to set ALL FX2-Mod 3 to be 255 to see what collage grid you are setting. Then set ALL FX2-Mod 1 to be 10 for a "52" grid. Then select your GLOBAL fixtures individually and set the FX2- Mod 2 to be 0 for the upper left corner, 1 for the next one right, and 2>9 for the others....more info on this in the manual.
