• State Not Answered
  • Date
    Mark Scott
  • Date
  • Replies 14 replies
  • Subscribers 7 subscribers
  • Views 1016 views
  • Users 0 members are here
Options
Related

DL2 no output...HELP

I have DL2 that is responding to dmx yet there is no output...

I know that sometimes the internal / external relay gets stuck - we have tried this several times through the CMA and no luck.

Tried just about every kind of reset available.

Any ideas?

Thanks

Mark
Parents
  • 0
    All is good now. The old standby of cycling the power did the trick. Unfortunately the way our rig is set up, it is impossible to turn off on fixture at a time without physically being at the fixture or up in the grid - and at 10 minutes to show - turning the whole rig off isn't really an option.

    This isn't the first time we have needed to cycle power to this particular DL2. We have four and the other three are very reliable. Is there something we could look at to bring this other one up to snuff?
Reply
  • 0
    All is good now. The old standby of cycling the power did the trick. Unfortunately the way our rig is set up, it is impossible to turn off on fixture at a time without physically being at the fixture or up in the grid - and at 10 minutes to show - turning the whole rig off isn't really an option.

    This isn't the first time we have needed to cycle power to this particular DL2. We have four and the other three are very reliable. Is there something we could look at to bring this other one up to snuff?
Children
No Data

www.etcconnect.com