DL2 no output...HELP

I have DL2 that is responding to dmx yet there is no output...

I know that sometimes the internal / external relay gets stuck - we have tried this several times through the CMA and no luck.

Tried just about every kind of reset available.

Any ideas?

Thanks

Mark

Parents

0 Mark Scott over 17 years ago

The Internal / External relay was the first thing I tried.

Marty,
I did try a fixture shutdown from the console - a couple of times, along with every type of reset there was...

This is not the same fixture that you are talking about. This is 'ice' left. The one ice right has been fine... If I remember correctly Benny took care of it months ago.

Thanks,
Mark

Reply

0 Mark Scott over 17 years ago

The Internal / External relay was the first thing I tried.

Marty,
I did try a fixture shutdown from the console - a couple of times, along with every type of reset there was...

This is not the same fixture that you are talking about. This is 'ice' left. The one ice right has been fine... If I remember correctly Benny took care of it months ago.

Thanks,
Mark

Children

No Data