If you look in the Menu (also in the CMA) under the SET -> PROJECTOR tab there is a drop down menu for "Projector Powerup" with three choices, Manual, Always, DMX. Make sure this setting is set to DMX to have the lamps come on when the units see DMX.
If you are still having issues after checking that, let me know.
If you look in the Menu (also in the CMA) under the SET -> PROJECTOR tab there is a drop down menu for "Projector Powerup" with three choices, Manual, Always, DMX. Make sure this setting is set to DMX to have the lamps come on when the units see DMX.
If you are still having issues after checking that, let me know.
