Options

DL 3 with "jittery" camera

One of our DL3's displays a "jittery" output from its camera. It appears like the camera is skipping. This only happens after being on all day.


Chris Lighthall
Parents
  • 0
    The most common issue is you will start seeing a cumulative lag appear in SDI.

    You can daisy-chain SDI between units, but another issue can be caused if you create a loop by daisy-chaining from the end unit back to the first unit. That can cause SDI to just lock up.
Reply
  • 0
    The most common issue is you will start seeing a cumulative lag appear in SDI.

    You can daisy-chain SDI between units, but another issue can be caused if you create a loop by daisy-chaining from the end unit back to the first unit. That can cause SDI to just lock up.
Children
No Data

www.etcconnect.com