Options
Related

Urgent Dl.3 problem

Hi everyone, we are currently using 4 Dl.3 for the second time and now when I try to use CMA no dl.3 show up. We are running lastest cma version and dl3 version.

Another question, Cam the ethernet port "die"? I mean first time we used them we lost contact right on the show of 2 dl.3, never got ethernet to work back on them and they were Brand new, In the box.

Anthony
Parents
  • 0
    There is no fuse. About the only way that you can check the port is to pull the computer out of the DL.3 base, leave all of the wires connected, and see if the link lights on the ethernet port on the computer itself are lit. Keep in mind that if these lights are not lit, it doesn't necessarily mean a bad etherport. It could still be a bad cable.

    Also, one thing you can do, is take the network cables that you have running to your switch and plug these directly into the computer itself rather than the back panel of the DL.3. It's possible that somehow the harness that jumps the ethernet signal from the back panel to the computer could be damaged/bad.

    Regards,
Reply
  • 0
    There is no fuse. About the only way that you can check the port is to pull the computer out of the DL.3 base, leave all of the wires connected, and see if the link lights on the ethernet port on the computer itself are lit. Keep in mind that if these lights are not lit, it doesn't necessarily mean a bad etherport. It could still be a bad cable.

    Also, one thing you can do, is take the network cables that you have running to your switch and plug these directly into the computer itself rather than the back panel of the DL.3. It's possible that somehow the harness that jumps the ethernet signal from the back panel to the computer could be damaged/bad.

    Regards,
Children
No Data

www.etcconnect.com