DL3 server does come on at powerup

I've had 3 DL3's for about a month. In the last couple weeks when I power them up, one of the servers doesn't power up. The moving light part powers on and goes thru it's normal calibration just no server, screen or CMA contact. I have to go manually turn it on(holding the top and bottom buttons). It works fine once I go up and turn it on. It was turning on before correctly. Any suggestions?
Thanks in advance,
Richard

Parents

0 sblair - Former HES Forum Member over 16 years ago

Chapter 17 in the manual illustrates which buttons you can use to force the iris open on power up so you can see the video output.

After forcing the Iris open, plug in a USB keyboard into the back of the fixture and use the 2 buttons to power on the server.

You can then get into the BIOS by hitting Delete when the BIOS splash screen comes up with the HES logo.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 sblair - Former HES Forum Member over 16 years ago

Chapter 17 in the manual illustrates which buttons you can use to force the iris open on power up so you can see the video output.

After forcing the Iris open, plug in a USB keyboard into the back of the fixture and use the 2 buttons to power on the server.

You can then get into the BIOS by hitting Delete when the BIOS splash screen comes up with the HES logo.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data