Options
Related

Collage issue(Urgent)

I have one problem about DL.2 collage.I use two DL.2 units to collage,I programme "enhance collage" and use the grid to have the alignment to make sure it's not fuzzy,I also use the "fade left and right" for blending.If the clips are in low colour temperture or kind of abstract stuff,the image is seamless;if the clips are in high colour temperture and some specific stuff,the overlapping area is visible,and the overlapping area is yellow.
I think the lamps' not same luminous though they both are new.
Do you guys have suggestion for the problem?
Parents
  • 0
    Yes,Matt
    The lamps hours are similar,they are range in 150 to 155 hours.And I try to swap new lamps for the DL.2,it doesn't help.
    What I would do is to select effect to be "collage" instead of "enhance collage",the overlapping area seems to be brighter,I use "fade left and right" for blending,it does help,the area is still visible but better.Contrast and black level option also helps.
    Refers to you suggestion for the curve,set it to be 144 or 155,so what is the corresponding value by percentage in cmy?
    Thanks
Reply
  • 0
    Yes,Matt
    The lamps hours are similar,they are range in 150 to 155 hours.And I try to swap new lamps for the DL.2,it doesn't help.
    What I would do is to select effect to be "collage" instead of "enhance collage",the overlapping area seems to be brighter,I use "fade left and right" for blending,it does help,the area is still visible but better.Contrast and black level option also helps.
    Refers to you suggestion for the curve,set it to be 144 or 155,so what is the corresponding value by percentage in cmy?
    Thanks
Children
No Data

www.etcconnect.com