• State Not Answered
  • Date
    lennart lindhout
  • Date
  • Replies 4 replies
  • Subscribers 7 subscribers
  • Views 491 views
  • Users 0 members are here
Options
Related

DL4??

Hi Guys,

I'm wondering... If the DL4 comes out to play.. Can there be a Hippotizer Server in it? Or could the Axon be upgraded so you can run your RGBHV/VGA signals through the server so you keystone those signals..
A lot of VJ's and presentations want to run VGA but in the DL2 & 3's it doesn't run through the server, making it pretty hard to project in a nice perspective in the venue I work in.

Hope somebody will hear my prayers some times..
I know you can framegrab/capture VGA easily in Windows, but nobody seems to use it. Or am I wrong?

Greetz,

Lennart
Parents
  • 0
    Hi Lennart,

    On the DML-1200, there essentially two options for key stoning or warping.

    1) You can use the key stone correction that is available from the on-board Hippo. This offers a more' real time' key stone correction to whatever is outputting from the media server and is NOT applied to any of external inputs.

    2) You can also utilize the Warp Board which is also on the fixture. This allows for more complex warps and keystone correction. Although more complex warping is possible, its unfortunately not real time. This is done by using Projector Toolset to create the various warp configurations, saving them as a preset, uploading them to the DML-1200, and then re-calling the presets with DMX. Using the Warp Baord, like Scott said, these can be applied to all external inputs, as well as the warp the media server.

    Hope this helps,
    p
Reply
  • 0
    Hi Lennart,

    On the DML-1200, there essentially two options for key stoning or warping.

    1) You can use the key stone correction that is available from the on-board Hippo. This offers a more' real time' key stone correction to whatever is outputting from the media server and is NOT applied to any of external inputs.

    2) You can also utilize the Warp Board which is also on the fixture. This allows for more complex warps and keystone correction. Although more complex warping is possible, its unfortunately not real time. This is done by using Projector Toolset to create the various warp configurations, saving them as a preset, uploading them to the DML-1200, and then re-calling the presets with DMX. Using the Warp Baord, like Scott said, these can be applied to all external inputs, as well as the warp the media server.

    Hope this helps,
    p
Children
No Data

www.etcconnect.com