Options
Related

DL-2 Stock Content Not Looping?

Well it's been awhile, which I guess is a good thing regarding any problems.:)

Anyone experienced any issues with the DL-2 not looping or "freezing up" of files in the middle of the clip with a majority of the stock content files?
Uploading custom or third party files are not a problem and those all seem to run fine.
The problem seems to be intermittent and can sometimes be resolved for a short time by re-booting the server, although it seems to be becoming more of a problem and occurring more often.
I briefly scanned the board and didn't see a thread addressing this issue.
Any suggestions or comments would be greatly appreciated.
Parents
  • 0
    The most current is 1.5 which if you run that conbined with CMA 1.5, CMA will actually reject any bad content that you try to load onto the units. It is about 3 weeks old at this point.

    In previous versions there were content problems that could slip by and cause the issues that you are seeing.

    It just a good idea to remove it all and see if the issue goes away. One piece of bad content can cause all sorts of problems, and since you guys are just collecting it on the units, there may be one or two that slipped in.

    Regards,
Reply
  • 0
    The most current is 1.5 which if you run that conbined with CMA 1.5, CMA will actually reject any bad content that you try to load onto the units. It is about 3 weeks old at this point.

    In previous versions there were content problems that could slip by and cause the issues that you are seeing.

    It just a good idea to remove it all and see if the issue goes away. One piece of bad content can cause all sorts of problems, and since you guys are just collecting it on the units, there may be one or two that slipped in.

    Regards,
Children
No Data

www.etcconnect.com