Weird CMA issues

Well here's the story after trying to troubleshoot this one for over and hour and a half and still no sucess. I have 5 DL3's in my rig here in Long Beach California and I am running ARTNET to control them with a Jands Vista. I have done this many times in the past, but this time has me baffled. I am running the console through a router set to act as a DHCP server with the beginning IP as 2.0.0.1 and the subnet set to 255.0.0.0. There is a cat5 home run from the router at FOH to a 24 port switch which then breaks out to the 5 x DL3's. The art net seems to be catching and I gain control over the DL3's, but not all the time. The CMA is not working at all and is not seeing any of the DL3's. I have tried disabling my anti virus and firewall, I have tested the cat5 cables. I have replaced the cat5 cables. I have replaced the switch and the router and still the same problem.. Any ideas. I'd appreciate it sooooo much. Thanks in advance. Geoffrey Platt
404-592-7136
Parents Reply Children
No Data