• State Not Answered
  • Date
    Cormac Jackson
  • Date
  • Replies 3 replies
  • Subscribers 7 subscribers
  • Views 541 views
  • Users 0 members are here
Options
Related

DL3 Blue line

Name:Cormac jackson
Date:18 October 2009
S/W : 1.5.2

Hi,
I am currently touring a small DL3 package.
3 x DL3
1 x d-tec mix pro

I have an issue with a constant vertical thin blue line perhaps one or two pixels wide appearing on the left hand side of every fixture when i use either the internal camera or if i run an other sources into the d-tec and route it back to the projector.
If i run the fixtures in collage the blue line moves to the left hand side also.
I am not getting this line with any of my custom content or stock content so it is limited to the cameras and external source which is an apple mac.

Could this be a d-tec issue or a fixture issue....we have changed mains supply and swapped all fixtures to the same supply but still getting the line.We are running from venue supplies so no generators involved.

thanks Cormac
Parents
  • 0
    Hi Marty,
    Ok so we got another d-tec unit and we are still getting the blue line.
    We changed s-video camera to both NTSC and PAL and the problem is on both settings.
    We know that it is only on the input side of the d-tec unit and only on the DL3 fixtures and only on the cameras of the fixtures?
    It's the same line on every fixture in the same place.....suggestions or workarounds appreciated.

    thanks C
Reply
  • 0
    Hi Marty,
    Ok so we got another d-tec unit and we are still getting the blue line.
    We changed s-video camera to both NTSC and PAL and the problem is on both settings.
    We know that it is only on the input side of the d-tec unit and only on the DL3 fixtures and only on the cameras of the fixtures?
    It's the same line on every fixture in the same place.....suggestions or workarounds appreciated.

    thanks C
Children
No Data

www.etcconnect.com