DHCP Issue

After upgrading my DL.2's to the latest software, I have been having constant trouble with seeing them on the CMA.

They no longer are visible when a DHCP server gives them their ip address. If I boot them up with no server and they give themselves a self-assigned ip (i.e. no DHCP server in the pipeline) I can see them but only if I boot up a pc identically with a self assigned ip.

This is a real problem for me as I need to continually update content from another location, plus during a show I need to have the pc connected to the network. I have figured some really crappy workarounds, but do need a fix for this.

Parents

0 marty postma - Former HES Forum Member over 16 years ago

It might be how you are powering up your system.
Make sure that your console is fully up with your show loaded and that your DHCP device in on as well as all network points (switches, etc) are fully up before you power on the DL units.
Are all your devices Gigabit speed as well? (DHCP device, switches, etc?)

Reply

0 marty postma - Former HES Forum Member over 16 years ago

It might be how you are powering up your system.
Make sure that your console is fully up with your show loaded and that your DHCP device in on as well as all network points (switches, etc) are fully up before you power on the DL units.
Are all your devices Gigabit speed as well? (DHCP device, switches, etc?)

Children

No Data