DL.2 switching from int. media to ext. input by itself
im having trouble with 8 dl2s doing this it is sometimes all of them or just one or 2 of them. and they all do this when they are powered do and powered back up. they are installed in a nightclub all networked running on a hog 3. i also cant get the cma to pull up all of the lights. thanks
The first few things to try would be upgrading to the newest 1.5.2 software on the units and your CMA.....your custom content shouldn't get touched durning an upgrade. The CMA wil also scan all your custom content onthe new version and tell you if the is a corrupt or mis-encoded file on your units which could also cause erratic behavior.
You will also have much better results with CMA if you run it in a PC environment (Bootcamp is fine).
Check your cues in your console that you are not sending a "switch" command anywhere as well.
The first few things to try would be upgrading to the newest 1.5.2 software on the units and your CMA.....your custom content shouldn't get touched durning an upgrade. The CMA wil also scan all your custom content onthe new version and tell you if the is a corrupt or mis-encoded file on your units which could also cause erratic behavior.
You will also have much better results with CMA if you run it in a PC environment (Bootcamp is fine).
Check your cues in your console that you are not sending a "switch" command anywhere as well.
