Frozen DL.2 Fixture

Hi, I have a DL.2 fixture that's frozen and I'm not sure how to get it unfrozen. I have the ability to pan & tilt the fixture via the Road Hog console, however my global & graphics layers are totally unresponsive. Is there some sort of reset that I need to perform to resolve this issue?

Any help is appreciated.

Thanks, folks!

Parents

0 marty postma - Former HES Forum Member over 14 years ago

Two quick things to try:

1 - Reboot the server (either by DMX or CMA....I usually have better results with CMA in a "lockup" situation)
2 - Set the input to "External" and then back to "Internal" in case the physical relay has gotten stuck.

Hope this helps. :)
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 marty postma - Former HES Forum Member over 14 years ago

Two quick things to try:

1 - Reboot the server (either by DMX or CMA....I usually have better results with CMA in a "lockup" situation)
2 - Set the input to "External" and then back to "Internal" in case the physical relay has gotten stuck.

Hope this helps. :)
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data