Options
Related

CMA not seeing dl3

Hi,

I have a dl3 that will not show up in cma. I have the latest version of cam and the xp embedded software installed (respectively).

I am using a net book with windows 7 32bit, a link sys router. I can see the dl3 attached to the router in the routers configuration page, I can even ping the dl3 from command prompt. But it will not show up in cma.

Any help is greatly appreciated.
Parents
  • 0
    Here's a link to the older versions of the CMA if indeed you are running
    an older or newer version than your fixture has.
    Changing the CMA software is going to much easier if your under time pressure than upgrading the DL3 software which can be tricky sometimes.
    www.highend.com/support/discontinued/digital_lighting/dl2_software_archive.asp

    As Matts has said Switch not a router and all firewalls/virus protection off.

    Good luck C
Reply
  • 0
    Here's a link to the older versions of the CMA if indeed you are running
    an older or newer version than your fixture has.
    Changing the CMA software is going to much easier if your under time pressure than upgrading the DL3 software which can be tricky sometimes.
    www.highend.com/support/discontinued/digital_lighting/dl2_software_archive.asp

    As Matts has said Switch not a router and all firewalls/virus protection off.

    Good luck C
Children
No Data

www.etcconnect.com