LCD Display through the Projector

So I have a DL.2. I have control. But there is not LCD Display instead the demo video that usually gets shown is being fed through the projector so I can't project any media I want, I got it to stop once but once I restarted it, it happened again and I can't make it stop this time.
Any Suggestions?
Parents
  • Hi Lex,

    It sounds like the video connection to the LCD screen for the menu is either disconnected or loose. Open up the top box of the fixture on the menu side and make sure that all of the connections are tightly seated. These include the VIVO cable on the video card (the svideo-like cable plugged into the center of the video card), the connection from the VIVO cable to the composite cable that runs to the menu, the connection from the composite cable to the menu video cable, and also the small white plug on the back of the menu itself.
Reply
  • Hi Lex,

    It sounds like the video connection to the LCD screen for the menu is either disconnected or loose. Open up the top box of the fixture on the menu side and make sure that all of the connections are tightly seated. These include the VIVO cable on the video card (the svideo-like cable plugged into the center of the video card), the connection from the VIVO cable to the composite cable that runs to the menu, the connection from the composite cable to the menu video cable, and also the small white plug on the back of the menu itself.
Children
No Data