Any way to get this put into the software? Basically the implementation I'd like to see is that if the fixture boots without being plugged into the network it defaults to the 169.x.x.x address, upon using this address, release/renew DHCP every 5 or so minutes until it gets any other IP address. Depending on how load-in is going, FoH isn't necessary set up before the DL-3's are up and running, which presents a problem when we have to cycle power to get them to release and renew their IP address onto our video network when it's finally up and running. Using 168.x.x.x as our network IP is not an option. I've tried using the command line with several different setups and I can't force it to release and renew. Thanks.
