Options
Related

DL3 S video Input

Hello I have 3 Dl3 that im trying to st as S video input from an edirol v8 video mixer..
but the dl3 doesnt recogmize teh svideo signal...

is there a stepby step directions of where i can get this done, i really need to work with the v8 and place a video aqmplifier to go to all 3 of them..

wha im i missing
Parents
  • 0
    1 - Make sure you have control of your fixtures via your lighting console and you are able to call up stock media from onboard the server.
    2 - Set your "Motion" fixtures to 00% intensity
    3 - Set your "Capture" control to "Svideo" (On Hog-3 based desks this is a slot option above the encoders on the right screen)
    4 - wait about 30 sec, or until you can hear the relay "click" inside the unit
    5 - Release/Clear your Motion fixtures
    6 - Set your Motion, Global, and at least 1 Graphics layer to Full intensity for each of your fixtures
    7 - select only your graphics layer and point it to "Media Folder 255" & "File 001"

    Note: you will need a dedicated Svideo line to run to each fixture (either from a unique source, or use a VDA) as there is no Svideo passthough on these units.

    Hope this helps. :)
Reply
  • 0
    1 - Make sure you have control of your fixtures via your lighting console and you are able to call up stock media from onboard the server.
    2 - Set your "Motion" fixtures to 00% intensity
    3 - Set your "Capture" control to "Svideo" (On Hog-3 based desks this is a slot option above the encoders on the right screen)
    4 - wait about 30 sec, or until you can hear the relay "click" inside the unit
    5 - Release/Clear your Motion fixtures
    6 - Set your Motion, Global, and at least 1 Graphics layer to Full intensity for each of your fixtures
    7 - select only your graphics layer and point it to "Media Folder 255" & "File 001"

    Note: you will need a dedicated Svideo line to run to each fixture (either from a unique source, or use a VDA) as there is no Svideo passthough on these units.

    Hope this helps. :)
Children
No Data

www.etcconnect.com