ETC Revolution Parts List

Hello

I'm trying to find a parts list for the Revolutions, particularly concerning the lamp assembly. I've managed to get a new ceramic holder as it was completely destroyed, but I need new lamp contacts, nylon based? contact guides (Silver Coloured) and the 2 tiny springs that create tension on the ceramic.

As you can see, they are difficult to describe, so part numbers would be a real bonus.

Many Thanks

Simon Denman-Ellis

Assistant Technical Director

Le Rosey Concert Hall, Switzerland

mmeskill over 8 years ago

Contact Corey Casio at ETC GmbH. +49 (8024) 47 00-0

The whole Lamp Burner Sub assembly is: 7160A2021 (that is the ‘current’ rev I version so you would need to ensure you have similar parts.)

I’ve tried to attached the drawing with part numbers below :-)

7160A2021-I.pdf
corey cascio over 8 years ago

Hi Simon,

our Swiss Dealer -> EC Merlo has These parts in his warehouse in Switzerland.
You can contact them and order following parts:

2x HW7152 --- S4R Socket Spring .18 Dia x.31L (17)
2x 7160A4010 --- S4R Socket Insulator (10)
1x 7160A4011 --- S4R Socket Ceramic (11)
2x 7160A3013 --- S4R Socket Contact (6)
1x 7160A3078 --- S4R Socket Plate Guide (8)
5x HW1184 --- Screw 4-40x1/4 PhPHMS (13)
1x 7160A3075 --- S4R Socket Housing Plate (7)

The numbers in parenthesis are the numbers from the drawing from Mike Meskill.

The cable connecting to the contact is one complete cable harness going to the power supply.
This is more difficult to replace and you can discuss its replacement with EC Merlo.

I hope that helps!
Welshtechie over 8 years ago in reply to mmeskill

Hi Mike

That's Brilliant. Thanks so much.

I know it's not the correct thread, but do you also have a parts list for the LED Desire D60? I need Gel Holder Retaining clips and springs.

Many Thanks

Simon Denman-Ellis

Assistant Technical Director

Le Rosey Concert Hall, Switzerland
corey cascio over 8 years ago in reply to Welshtechie

Hi Simon,

Our Swiss Dealer - EC Merlo - can help you out with all the ETC Spare Parts - http://www.ecm-sa.ch/.
Welshtechie over 8 years ago in reply to corey cascio

Hi Corey

That's Great.

Many Thanks

Simon Denman-Ellis

Assistant Technical Director

Le Rosey Concert Hall, Switzerland
corey cascio over 8 years ago in reply to Welshtechie

Hi Simon,

For D40/D60, the gel retainer clip plus spring plus screw can be ordered with this Part Number:

7410K4008 --- Gel Clip Replacement Kit for Desire D40 D60
Welshtechie over 8 years ago in reply to corey cascio

Thanks Corey, thats perfect. Already repaired the revolution so that`s back in service. Thanks everybody for your valuable help.

Simon Denman-Ellis
Assistant Technical Director
Le Rosey Concert Hall. Switzerland.
Pedro Alves over 8 years ago in reply to corey cascio

Hi Corey

I already know that ETC Revolution are to be discontinued but we still have 10 and a serious problem with the Shutter Module. We want to buy more SM but we can't find any. It was told to my TD that you no longer produce this. So can you told were to find some SM???

Pedro Alves
steve.wiltshire over 8 years ago in reply to Pedro Alves

Hi Pedro,

We are ramping down production of Revolution but they are currently still available. The shutter modules are on a product hold at the moment due to a supply issue but I believe they should be released for manufacturing again soon.

However, even once we stop production we try to maintain stocks of parts for repairs for as long as possible, there are some products that we discontinued twenty years ago that we still see in repairs. We can't guarantee just how long we will maintain support as sometimes it is beyond our control but we do our best to maintain supplies of spares where we can.

Shutter modules are repairable but need to go back to the factory to be done, if you have any failed ones then please contact your local dealer and we can arrange to get them fixed.

Steve Wiltshire
Technical Services Manager
ETC Ltd