Elation Rayzor Q7 questions, not etc, but...

So far, so good. Version B sounds preferable to me, does sound more involved to set up but will be easier to use in the end

ok. first i suggest you patch them with the regular Extended profile. go to Live, select the first of your rayzors, enter and hit About, click Patch in the bottomish right corner. you want to write down the numbers in the Address column for Pan, for the second instance of Red, the third instance, the fourth instance and for Macros. repeat for all your rayzors.

go to Patch, softkey Fixtures. arrow down to the rayzor, hit softkey Copy, Label, add "mother part1" to the Label. softkey Copy, Label, add "mother part2" to the Label. softkey Edit. Delete everything except Macros. Return, arrow to mother part 1. Delete everything after the first instance of White (so starting with the second instance of Red) including Macros. whatever is further down from Macros you leave. Return. Return

you're back in regular patch now. select all your Rayzor channels. At Enter, and confirm with Enter. select first channel, click Type. click Favorites, click mother part1, type At and the number you wrote down for your first channels Pan (this is the start address you entered in the fixture itself). Type Part 2 Enter, click Type, click mother part2, type At and enter the number your wrote down for your first channel's Macro parameter. that's your first mother fixture!
think of 3 channel numbers for the first fixture's children. select them, click Type, Manufacturer, click " > " until you see Generic and then navigate to LED RGBW, click, click 8B. type At and enter the number you wrote down for your first channel's second Red parameter.
this should mean that you patched your first fixture! now rinse and repeat :)
ok. first i suggest you patch them with the regular Extended profile. go to Live, select the first of your rayzors, enter and hit About, click Patch in the bottomish right corner. you want to write down the numbers in the Address column for Pan, for the second instance of Red, the third instance, the fourth instance and for Macros. repeat for all your rayzors.

go to Patch, softkey Fixtures. arrow down to the rayzor, hit softkey Copy, Label, add "mother part1" to the Label. softkey Copy, Label, add "mother part2" to the Label. softkey Edit. Delete everything except Macros. Return, arrow to mother part 1. Delete everything after the first instance of White (so starting with the second instance of Red) including Macros. whatever is further down from Macros you leave. Return. Return

you're back in regular patch now. select all your Rayzor channels. At Enter, and confirm with Enter. select first channel, click Type. click Favorites, click mother part1, type At and the number you wrote down for your first channels Pan (this is the start address you entered in the fixture itself). Type Part 2 Enter, click Type, click mother part2, type At and enter the number your wrote down for your first channel's Macro parameter. that's your first mother fixture!
think of 3 channel numbers for the first fixture's children. select them, click Type, Manufacturer, click " > " until you see Generic and then navigate to LED RGBW, click, click 8B. type At and enter the number you wrote down for your first channel's second Red parameter.
this should mean that you patched your first fixture! now rinse and repeat :)

ok. first i suggest you patch them with the regular Extended profile. go to Live, select the first of your rayzors, enter and hit About, click Patch in the bottomish right corner. you want to write down the numbers in the Address column for Pan, for the second instance of Red, the third instance, the fourth instance and for Macros. repeat for all your rayzors.

go to Patch, softkey Fixtures. arrow down to the rayzor, hit softkey Copy, Label, add "mother part1" to the Label. softkey Copy, Label, add "mother part2" to the Label. softkey Edit. Delete everything except Macros. Return, arrow to mother part 1. Delete everything after the first instance of White (so starting with the second instance of Red) including Macros. whatever is further down from Macros you leave. Return. Return

you're back in regular patch now. select all your Rayzor channels. At Enter, and confirm with Enter. select first channel, click Type. click Favorites, click mother part1, type At and the number you wrote down for your first channels Pan (this is the start address you entered in the fixture itself). Type Part 2 Enter, click Type, click mother part2, type At and enter the number your wrote down for your first channel's Macro parameter. that's your first mother fixture!
think of 3 channel numbers for the first fixture's children. select them, click Type, Manufacturer, click " > " until you see Generic and then navigate to LED RGBW, click, click 8B. type At and enter the number you wrote down for your first channel's second Red parameter.
this should mean that you patched your first fixture! now rinse and repeat :)
ok. first i suggest you patch them with the regular Extended profile. go to Live, select the first of your rayzors, enter and hit About, click Patch in the bottomish right corner. you want to write down the numbers in the Address column for Pan, for the second instance of Red, the third instance, the fourth instance and for Macros. repeat for all your rayzors.

go to Patch, softkey Fixtures. arrow down to the rayzor, hit softkey Copy, Label, add "mother part1" to the Label. softkey Copy, Label, add "mother part2" to the Label. softkey Edit. Delete everything except Macros. Return, arrow to mother part 1. Delete everything after the first instance of White (so starting with the second instance of Red) including Macros. whatever is further down from Macros you leave. Return. Return

you're back in regular patch now. select all your Rayzor channels. At Enter, and confirm with Enter. select first channel, click Type. click Favorites, click mother part1, type At and the number you wrote down for your first channels Pan (this is the start address you entered in the fixture itself). Type Part 2 Enter, click Type, click mother part2, type At and enter the number your wrote down for your first channel's Macro parameter. that's your first mother fixture!
think of 3 channel numbers for the first fixture's children. select them, click Type, Manufacturer, click " > " until you see Generic and then navigate to LED RGBW, click, click 8B. type At and enter the number you wrote down for your first channel's second Red parameter.
this should mean that you patched your first fixture! now rinse and repeat :)