• Date FormerMember
    FormerMember
  • Date
  • Replies 4 replies
  • Subscribers 60 subscribers
  • Views 6360 views
  • Users 0 members are here

S4 36 degree Focus problem

Hi all,

We have a number of S4 36 degree lenses, recently one of our customers noted that when shuttering down the lower projected shutter had a "bleed through" or "shadow".

we have looked at most of our kit and this is true for a lot of our units, also I can not focus out to get the "doughnut" or dark area,

we have cleaned the most of the lenes's, one at a time so as not to mix things up, all back in the right slots, only got this problem with 36 degree 

has any one else had this problem ?

and if you did how did you fix it ? 

Parents
  • Two things I do that sometimes help:
    1) If you can't center the lamp well when adjusting bench focus because the filaments are sagging too much you can 180 the lamp (only 575w lamps) then try re-centering the lamp. If the lamp is centered well the bleed is usually less.

    2) If you tighten the inner knob (field adjustment) this can sometimes help, although this won't produce the brightest output. Experiment a little and you may be able to get it more acceptable than it was.
Reply
  • Two things I do that sometimes help:
    1) If you can't center the lamp well when adjusting bench focus because the filaments are sagging too much you can 180 the lamp (only 575w lamps) then try re-centering the lamp. If the lamp is centered well the bleed is usually less.

    2) If you tighten the inner knob (field adjustment) this can sometimes help, although this won't produce the brightest output. Experiment a little and you may be able to get it more acceptable than it was.
Children
No Data
Related

www.etcconnect.com