Axon Mask 5:1 Collage

We have a 5 wide by 1 tall collage and are having difficulty getting a mask to match up. Our set piece is almost 80ft wide and curved in x, y & z axis. We have tried breaking the mask up into multiple files and applied to different layers but not quite working.

Based on the attached photo, can someone give us some direction or ideas to try?

www.flickr.com/photos/38885214@N04/4534332271/
www.flickr.com/photos/38885214@N04/4534328079/

Thanks,
Dustin

Parents

0 dholum - Former HES Forum Member over 14 years ago

We are using 5 Christie 16k projectors shooting from the back of the room with 5 Axon servers. We are only projecting on the curved ceiling piece, the curves upstage are being light by lighting. The 5 projectors are broken up as follows, 4 left to right across the top two pieces, the 5th projector covers the piece on the right that connects down to the ground.

Dustin
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 dholum - Former HES Forum Member over 14 years ago

We are using 5 Christie 16k projectors shooting from the back of the room with 5 Axon servers. We are only projecting on the curved ceiling piece, the curves upstage are being light by lighting. The 5 projectors are broken up as follows, 4 left to right across the top two pieces, the 5th projector covers the piece on the right that connects down to the ground.

Dustin
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data