Options
Related

Axon Network Issue

I have an Axon that recently began experiencing a network IP of 0.0.0.0 upon startup. The fix in the past has been to load the BIOS and "restore defaults." This worked for a while, but now is no longer working. If I pull the network cable, I used to get a 169.x.x.x IP but now I'm no longer seeing this. I'm still getting a 0.0.0.0 upon restart with no network attached.

With the 0.0.0.0, it does not find the Axon server and I can no longer use the local CMA.

Any ideas what this could be??? Could it be a network card problem and need to replace the motherboard (or is it a card replacement...can't remember if it's attached to the motherboard)??

Ideas/Suggestions would be greatly appreciated.

J
Parents
  • 0
    [QUOTE=Abbe RPM Digital Lighting;53357]Hi Jon,

    Yes there is a link:forums.highend.com/showthread...highlight=BIOS

    And i think you should look into the oxide / dirt issue i mention.
    A long shot could be that there is a semi short (metal flake, silver confetti) to the "ResetToDefault" pins that is usual to motherboards.

    Before change of motherboard i would go the clean route, by removing every part and clean + examine connectors and such.

    @ this point i also recommend that you call Support in Austin.

    Sorry for the inconvenience.

    Thanks Abbe! I'll give it a shot.

    J
Reply
  • 0
    [QUOTE=Abbe RPM Digital Lighting;53357]Hi Jon,

    Yes there is a link:forums.highend.com/showthread...highlight=BIOS

    And i think you should look into the oxide / dirt issue i mention.
    A long shot could be that there is a semi short (metal flake, silver confetti) to the "ResetToDefault" pins that is usual to motherboards.

    Before change of motherboard i would go the clean route, by removing every part and clean + examine connectors and such.

    @ this point i also recommend that you call Support in Austin.

    Sorry for the inconvenience.

    Thanks Abbe! I'll give it a shot.

    J
Children
No Data

www.etcconnect.com